FLUID CONTROLS PRIVATE LIMITED

Products

Flanges

Flange Assembly with Butt Weld End Connections SAE 3000# and 6000# Series



Flange Assembly with Butt Weld End Connections ISO 6162-1 & 2-2002	Flange Assembly with Butt Weld End Connections ISO 6162-1-2002 Dimensions : SAE 3000 PSI (Code) = 210 bar	Flange Assembly with Butt Weld End Connections ISO 6162-2-2002 Dimensions : SAE 6000 PSI(Code 61) = 410 Bar

Flange Assembly with Butt Weld End Connections SAE 3000# & 6000# Series ISO 6162-1-2002

Dimensions : SAE 3000 PSI (Code 61) = 210 bar

DN		PIPE SIZE	Фd	Фd1	Фd2	1	L	h	h1	B	B1	T	A	'0' RING SIZE	HEX.HD.CAP SCREW SIZE
INCH	MM	ODxWT													AFH
															AFU
1/2"	13	20.0x3.0	20	14.0	30.2	30	60	13	19	54	46	38.1	17.5	18.64x3.53	M8x25/5/16"_18UNC x 1_1/4"
		22.0x2.0	22	18.0
		21.3x2.6	22	16.0
															M8x40/5/16"_18UNC x 1_1/2"


3/4"	19	22 x 2.0	22	18.0	38.1	35	70	14	22	65	52	47.6	22.3	24.99 x 3.53	M 10x30/3/8"_16UNC x 1_1/4"
		25.0x3.0	25	19.0
		26.9x3.6	27	19.5
															M 10x40/3/8"_16UNC x 1_1/2"


1"	25	30.0x4.0	30	22.0	44.4	40	80	16	24	70	59	52.4	26.2	32.92 x 3.53	M 10x30/3/8"_16UNC x 1_1/4"
		35.0x4.0	35	27.0
		33.7x3.2	34	27.0
		38.0x2.5	38	33.0											M 10x45/3/8"_16UNC x 2"
		38.0x4.0	38	30.0

1_1/4"	32	38.0x4.0	38	30.0	50.8	45	90	16	22	80	73	58.7	30.2	37.69x3.53	M 10x30/7/16"_14UNC x 1_1/2"
		42.0x3.0	42	36.0
		42.3x3.2	43	36.0
		42.4x5.6	43	31.2											M 10x50/7/16"_14UNC x 2"


1_1/2"	38	38.0x4.0	38	30.0	60.3	50	100	16	25	94	83	69.9	35.7	47.22x3.53	M 12x35/1/2"_13UNC x 1_1/2"
		42.0x3.0	42	36.0
		48.3x4.5	49	39.0
		48.3x6.3	49	35.5											M 12x50/1/2"_13UNC x 2"


2"	51	42.0x3.0	42	36.0	71.4	60	120	16	26	102	97	77.8	42.9	56.74 x 3.53	M 12x35/1/2"_13UNC x 1_1/2"
		42.3x3.2	43	36.0
		48.3x3.2	49	42.0
		60.3x5.6	61	49.0
		60.3x8.0	61	44.0											M12x50/1/2"_13UNC x 2"

2_1/2"	64	76.1 x7.1	77	62.0	84.1	70	140	19	38	115	108	88.9	50.8	69.44 x 3.53	M 12x40/_1/2"_13UNCx 1_3/4"
		76.1 x3.6	77	69.0
		82.5x7.1	86	68.0
		80.0x2.0	80	76.0											M 12x60/_1/2"_13UNCx 1_3/4"


3"	76	60.3x3.6	61	53.0	101.6	80	160	22	41	136	131	106.4	61.9	85.32x3.53	M 16x50/_5/8"_11UNCx 1_3/4"
		76.1 x7.1	77	69.0
		88.9x3.6	77	62.0
			90	81.5											M 16x70/_5/8"_11UNCx 2 _3/4"


3_1/2"	89	76.1 x3.6	77	69.0	114.3	95	190	22	28	153	139	120.7	69.9	98.02x3.53	M 16x50/_5/8"_11UNCx2"
		88.9x3.6	90	81.5
		114.3 x.3.6	115	107.0
															M 16x70/_5/8"_11UNCx 2 _3/4"


4"	102	76.1 x3.6	77	69.0	127.0	110	220	25	35	163	152	130.2	77.8	110.72x3.53	M 16x50/_5/8"_11UNCx 2
		89.9x3.6	90	81.5
		114.3x3.6	115	107.0
															M 16x80/_5/8"_11UNCx 3 _1/4"


5"	127	139.7x4.0	140	131.5	152.4	120	220	28	41	181	185	152.4	92.1	136.12x3.53	M 16x55/_5/8"_11UNCx 2 _1/4"
		127.0x4.0	127	119.0

															M 16x80/_5/8"_11UNCx 3 _1/4"

2_1/2"	64	76.1 x7.1	77	62.0	84.1	70	140	19	38	115	108	88.9	50.8	69.44 x 3.53	M 12x40/_1/2"_13UNCx 1_3/4"
		76.1 x3.6	77	69.0
		82.5x7.1	86	68.0
		80.0x2.0	80	76.0											M 12x60/_1/2"_13UNCx 1_3/4"


3"	76	60.3x3.6	61	53.0	101.6	80	160	22	41	136	131	106.4	61.9	85.32x3.53	M 16x50/_5/8"_11UNCx 1_3/4"
		76.1 x7.1	77	69.0
		88.9x3.6	77	62.0
			90	81.5											M 16x70/_5/8"_11UNCx 2 _3/4"


3_1/2"	89	76.1 x3.6	77	69.0	114.3	95	190	22	28	153	139	120.7	69.9	98.02x3.53	M 16x50/_5/8"_11UNCx2"
		88.9x3.6	90	81.5
		114.3 x.3.6	115	107.0
															M 16x70/_5/8"_11UNCx 2 _3/4"


4"	102	76.1 x3.6	77	69.0	127.0	110	220	25	35	163	152	130.2	77.8	110.72x3.53	M 16x50/_5/8"_11UNCx 2
		89.9x3.6	90	81.5
		114.3x3.6	115	107.0
															M 16x80/_5/8"_11UNCx 3 _1/4"


5"	127	139.7x4.0	140	131.5	152.4	120	220	28	41	181	185	152.4	92.1	136.12x3.53	M 16x55/_5/8"_11UNCx 2 _1/4"
		127.0x4.0	127	119.0

															M 16x80/_5/8"_11UNCx 3 _1/4"

NOTES:* PN 170 bar

** PN 140 bar

*** PN 35 bar

NOTE: ISO: 6162 does not have a separate series for flange assembly with socket weld end connections. The entire assembly remains the same as butt weld end connections shown above. However, the sleeves are welded with adaptors to convert the butt weld to socket weld end connections and dimensions can be given on request.

The use of the ISO: 6162 system increases the overall length of the flange assembly which may not be acceptable in the piping design. For socket weld end connections, designers usually prefer the two-piece system based on ISO: 6162 dimensions shown on pages 25-27 of the catalog.

Top

SITE MAP