| DESCRIPTION |
| Five Valve Manifold Model 5DM1 is designed for direct mounting on differential pressure instruments. The manifold incorporates two process isolation valves, one equalizer valve and two drain/vent valves with separate connections. The process connection is through threaded connections for tube or pipe assembly. The valves are suitably angled to prevent fouling with the instrument. Dimensions shown are for the standard 54 mm or 2 1/8 inch instrument connection centres but also available for other centres on request. |
| Connections |
Process : 1/2”NPT (F)
Instrument : Flanged
Drain / Vent : 1/4” NPT (F), |
| Test Pressure |
@ 25° C Room Temperature
Hydrostatic : Body - 620 Kg/cm2
Seat - 413 Kg/cm2
Pneumatic : Seat - 40 Kg/cm2 |
| Gland packing |
PTFE : Standard
GRAPHOIL : Temperatures above 180°C |
| Material |
A 105, A 182 / A 479 Gr F 304SS, A 182 / A 479 Gr F316SS, Monel, Hastelloy |
| Finish |
CS : Zinc Plated and Dichromated; SS : Natural |
| Option |
Test Port on process side with plug. |
| Accessory |
Mounting Bolts - IS : 1364 - 1960 - 4 Nos
Interface seal - PTFE / VITO 'N' - 2 Nos |
