| DESCRIPTION |
| Five Valve Manifold Model "T" type Model 5TM1 is designed for direct mounting on differential pressure instruments. The manifold incorporates two process isolation valves, one equalizer valve and two drain/vent valves in a compact block. The process connection is threaded for connections by tube or pipe fittings. Dimensions shown are for the standard 54 mm or 2 1/8 inch centres for instrument and process connections but are available for other centres on request. Thread details shown are for standard popular sizes and available to suit other thread standards. |
| Connections |
Process : 1/2”NPT (F)
Instrument : Flanged
Drain / Vent : 1/4” NPT (F), |
| Test Pressure |
@ 25° C Room Temperature
Hydrostatic : Body - 620 Kg/cm2
Seat - 413 Kg/cm2
Pneumatic : Seat - 40 Kg/cm2 |
| Gland packing |
PTFE : Standard
GRAPHOIL : Temperatures above 180°C |
| Material |
A 105, A 182 / A 479 Gr F 304SS, A 182 / A 479 Gr F316SS, Monel, Hastelloy |
| Finish |
CS : Zinc Plated and Dichromated; SS : Natural |
| Mounting kit |
Mounting bracket with U bolts and necessary kits for fitting on 2"NB
stanchion pipe stand or wall mount. (to be ordered seperately) |
| Option |
Test Port on process side with plug. |
| Accessory |
Mounting Bolts - IS : 1364 - 1960 - 4 Nos
Interface seal - PTFE / VITO 'N' - 2 Nos |
