| DESCRIPTION |
Designed for direct or remote mounting of differential pressure transmitters. For remote mounting two oval/kidney flanges are used for connecting process pipe to manifold block. These manifold block incorporate five valves, two main valve for process isolation valve for vent two valves for equalizing.
Dimensions shown above are for the standard 54 mm or 2 1/8 inch instrument connection Centre distance found in majority of instruments. The manifold is also available for instruments with other centre distances for instrument connections (as 55 mm, 56 mm and 57 mm) but dimensions shown will vary. Please consult us for these dimensions. |
| Connections |
Process : Flanged
Instrument : Flanged
Drain / Vent : 1/4” NPT (F) |
| Test Pressure |
@ 25° C Room Temperature
Hydrostatic : Body - 620 Kg/cm2
Seat - 413 Kg/cm2
Pneumatic : Seat - 40 Kg/cm2 |
| Gland packing |
PTFE : Standard
GRAPHOIL : Temperatures above 180°C |
| Material |
A 105, A 182 / A 479 Gr F 304SS, A 182 / A 479 Gr F316SS, Monel, Hastelloy |
| Finish |
CS : Zinc Plated and Dichromated; SS : Natural |
| Mounting kit |
Mounting bracket with U bolts and necessary kits for fitting on 2"NB
stanchion pipe stand or wall mount. (to be ordered seperately) |
| Option |
Test Port on process side with plug. |
| Accessory |
Mounting Bolts - IS : 1364 - 1960 - 4 Nos
Interface seal - PTFE / VITO 'N' - 2 Nos |
