Fluid Controls Logo
home about us quality assurance clients products enquiry contact us careers dgfd
Products arrow Pipe Clamps arrow
Standard Duty and Heavy Duty Series
Product    
   
  PIPE CLAMPS - SHEARING FORCES / MATERIAL
   
  SHEARING FORCES DIAGRAM
 
 
The design of Pipe Clamps, and the choice of Standard or Heavy Duty Pipe Clamps body material, vary according to the loading, the shearing forces and the torque so as to provide for rigid installation. Shearing forces diagram for various tube sizes are given below for Standard and Heavy Duty Pipe Clamps for polypropylene, polyamide and aluminum. These graphs may be used for guidance in selection of clamps.
 
   
STANDARD SERIES WITH TOP PLATE AND HEX. BOLTS
 HEAVY SERIES
   
Heavy Series Standard Series
 
   
   
   
   
MATERIAL  
Clamp Body Material Properties Polypropylene PP
Density : 0.906 gm/cm3		 Polyamide - Nylon 66
Density : 1.12 - 15g/cm3		 Aluminum - LM 6
IS : 733-1983
Density : 2.65gm./cm3
Mechanical Properties

Tensile Yield Stress ASTM D 638 Flexural Modules ASTM D 790
 370 Kg/Cm2
 16,000 Kg/Cm2
 750 Kg/Cm2 3,300 Kg/Cm2
Yield 3,100 Kg/Cm2 @ 12% Elongation
Izod Impact Strength ASTM 0 256 Hardness
 7.5 Kg.cm./cm.
R70
 4.5 Kg. cm./cm.
R120
  
Thermal Properties

Melting Point Vicat Softening Point Maxm. Temp. Resistance
 160°C
150°C
-30°C to + 90°C		 20°C
210°C
-40°C to + 180°C
 to 400°C
Chemical Properties

Weak Acids, Solvents Benzene, mineral oils Alchohol, other oils, sea water		 cond. consistent
cond. consistent
consistent
 cond. consistent
cond. consistent
consistent
  
Suggested mfs Spec.
 IPCL KOYLENE
M3030
 GSFC GUJLCON
M28RC
 HINDALCO
6443 WP.
 
 
  Top
 
SITE MAP